Infusion Sets for Single Use — Luer Slip with Hypodermic Needle

Infusion & Injection

Disposable IV Infusion Set, Luer Slip with Hypodermic Needle

Basic export configuration · Luer Slip

Basic single-use infusion set with a 48 mm chamber, air vent, fluid filter, standard flow regulator and Luer Slip connection with hypodermic needle.

Request a quote View specifications ↓

Key takeaways

Basic export configuration: 48 mm drip chamber with air vent and fluid filter, 1.5 m PVC tube (3.0 × 3.86 mm ID/OD) and a standard PP/PE flow regulator.
Luer Slip push-fit connector supplied with a hypodermic needle, the simplest layout in our infusion set range.
Drop factor, needle size, spike type and DEHP status are stated on the specification sheet sent with your quotation.

This disposable IV infusion set is the basic configuration in our gravity infusion range: an infusion set for single use with a Luer Slip connector and a hypodermic needle already fitted. It suits hospitals, clinics and distributors that buy a standard IV giving set in volume and want a standard SKU for general-ward tenders.

Key Features

48 mm drip chamber with air vent and fluid filter
1.5 m standard PVC tubing, 3.0 × 3.86 mm ID/OD
Standard PP/PE flow regulator for manual rate adjustment
Luer Slip (push-fit) connector supplied with a hypodermic needle
Sterile, single use, EO sterilized

Applications

Routine gravity infusion of IV fluids from bottles or bags in general wards, emergency rooms, outpatient infusion rooms and rural clinics. Because the chamber is vented, the set can run from rigid bottles as well as collapsible bags. If your wards standardize on threaded fittings, compare the Luer Lock version.

How to specify when requesting a quote

Terminal: needle (state gauge and length) or protective cap
Drop factor your protocol uses, for example 20 drops per ml
Spike type and any filter rating named in your tender
PVC grade (standard or DEHP-free) and latex statement
Unit pack, box and carton counts, label language and destination market

Technical and purchasing information

Basic single-use infusion set with a 48 mm chamber, air vent, fluid filter, standard flow regulator and Luer Slip connection with hypodermic needle. The final configuration, packaging and supporting documents are confirmed against your order and destination market.

Chamber: 48 mm chamber with air vent and fluid filter
Tube: 1.5 m standard PVC tube, 3.0 × 3.86 mm ID/OD
Flow Regulator: Standard PP/PE flow regulator
Connector: Luer Slip with hypodermic needle

Application and configuration

Confirm the intended use, material, size and model before sample approval or production. Product-specific options are recorded in the quotation and specification sheet.

Packaging and cartons

Packaging, artwork and carton requirements can be reviewed for the selected product. Feasibility is confirmed for the exact order rather than assumed across the category.

Quality and documentation

Available quality and export records vary by product and market. Share the destination and required documents so they can be checked before approval.

Buyer questions, answered

Clear answers for preparing a comparable sourcing request for Infusion Sets for Single Use — Luer Slip with Hypodermic Needle.

What is an infusion set used for?

An IV infusion set carries fluid from a bottle or bag into a patient's vein by gravity. The spike enters the container, the drip chamber lets staff count drops, the flow regulator sets the rate, and the needle or connector at the end links the line to the patient. This page covers the basic Luer Slip set with a hypodermic needle attached.

Is an infusion set the same as an IV set or IV giving set?

In hospital purchasing, infusion set, IV set, IV giving set and IV administration set usually describe the same gravity line for IV fluids. What changes between quotes is the configuration: Luer Slip or Luer Lock connector, needle, cap or scalp vein needle at the end, Y-site, filter and drop factor. List these points when you compare suppliers.

What are the parts of this infusion set?

A spike, a 48 mm drip chamber with air vent and fluid filter, 1.5 m of PVC tubing (3.0 x 3.86 mm ID/OD), a standard PP/PE flow regulator, and a Luer Slip connector fitted with a hypodermic needle.

What is the drop factor of this infusion set?

Standard adult gravity sets are commonly built to deliver 20 drops per ml. The exact drop factor for this set is stated on the specification sheet sent with your quotation, so include the value your protocol uses in your request.